Single-Point Lubricators

Automatic Motor Lubricator

MEMOLUB EM
Single-Point Lubricator

The MEMOLUB® EM is a battery powered, self-contained automatic lubricator designed for the minimal lubricant requirements of electric motors.

  • Reliable lubrication 24 hours a day, reduce downtime
  • Reusable pump - low cost replaceable lube cartridges
  • Simple 12 or 24 month duration settings
  • Battery powered - no wiring needed
  • 2 year lubricator warranty

Part Numbers:
MLEM120 - MEMOLUB® EM Model 120cc

Lubricant cartridges & battery packs sold separately - Click here for information


How to order a MEMOLUB® EM lubricator - click here .pdf

The MEMOLUB® EM lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related with manual lubrication.

  • 120cc lubricant capacity
  • 140psi max discharge pressure from start to finish
  • Use with Oil or Grease (up to NLGI #2)
  • Remote mount up to 6 feet from the lube point
  • Use in a wide temperature range

All MEMOLUB lubricators are designed with a transparent housing for quick visual inspection of the lubricant level.

Simple Programming

The MEMOLUB® EM daily lubricant output is programmed using the simple colored MEMO system. The Red and White timing MEMOs determine how long it takes to empty the lubricant cartridge.

Memolub EM - Memos | Power Lube Industrial

There are two basic time settings; 12 and 24 month ideally suited for electric motors. Once the appropriate colored MEMO is installed, the program is retained in the MEMO fitting, and at the lube point, allowing the user to interchange other MEMOLUB® EM lubricators without the worry of reprogramming.

Memolub EM is Easy to Install

Grease filled lubricators come preloaded with a lubricant cartridge and battery pack for quick installation. Oil filled lubricators require installation of the lubricant cartridge and battery pack on site.

Memolub EM - Installation | Power Lube Industrial

Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.

Memolub EM Technical Drawing | Power Lube Industrial
Memolub EM Technical Drawing | Power Lube Industrial
Memolub EM Technical Drawing | Power Lube Industrial
  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Memolub EM Downloads
To open the lubricator, place it upright on a flat surface. With one hand on top of the transparent housing, press firmly. With the other hand, hold the ribbed surface of the locking ring and turn it counter-clockwise. Remove the locking ring and the transparent housing.   .....Download
Adobe Acrobat Reader website Adobe Reader XI does more than ever. So you can, too. Adobe Reader software is the free trusted standard for reliably viewing, printing, and annotating PDF documents. It’s the only PDF file viewer that can open and interact with all types of PDF content, including forms and multimedia.

Pages

Memolub
Application Case Study
Case Study No. 607
 Vertical Machining Center | Power Lube Industrial Vertical Machining Center | Power Lube Industrial
Industry:
Automotive
Application:
Machining Center
Issue:
Manual lubrication was done on an inconsistent basis, and often not at all on this vertical machining center.
Solution:
Two 6-Point MEMOLUB lubrication systems were placed inside the machine to service all lube points, while the lubricators were mounted outside the cabinet, for easy lube cartridge replacement and visual inspection.

Pages

Memolub
Application Case Study
Case Study No. 052119 - Lubricating Bottle Crusher Machine Bearings
Memolub 12-Point Lubrication System
Application:
General Production Equipment
Industry:
Food & Beverage
Background:
Equipment operated 24/7 making it very difficult to stop for the required maintenance intervals. To lubricate the 12 bearings, the machine had to be completely shut down and locked out and access to the bearings required several panels be removed. When lubrication was done, it was done so very quickly in order to get the equipment back up and running. This led to inadequate, and sometimes completely missed, lubrication.
Solution:
We installed a MEMOLUB® 12-point Multi-Point System to supply constant lubrication to the bearings, while the bottle crusher remained in operation. The lubrication system was mounting to the outside of the equipment, making it possible to replenish the lubricant supply without shutting down the equipment. This was a huge advantage as it allowed maintenance technicians to avoid time-consuming lock-out/tag-out procedures while still remaining compliant.
Worth Mentioning:
Multi-Point Systems with more than 8 outlets have restrictions on tubing OD, tubing length and the viscosity of the lubricant. Please call our staff at 800-635-8170 to answer any questions about sizing and installing your MPS System.

Pages

Call to Order:
(800) 635-8170
Memolub
  EM Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
Memolub Standard and Mega Dust Cover
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet