Single-Point Lubricators

Memolub EM | Power Lube Industrial

MEMOLUB® EM
Single-Point Lubricator

The MEMOLUB® EM is a battery powered, self-contained automatic lubricator designed for the minimal lubricant requirements of electric motors.

  • Reliable lubrication 24 hours a day, reduce downtime
  • Reusable pump - low cost replaceable lube cartridges
  • Simple 12 or 24 month duration settings
  • Battery powered - no wiring needed
  • 3 year lubricator warranty

Part Numbers:
MLEM120 - MEMOLUB® EM Model 120cc

Lubricant cartridges & battery packs sold separately - Click here for information


How to order a MEMOLUB® EM lubricator - click here .pdf

The MEMOLUB® EM lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related with manual lubrication.

  • 120cc lubricant capacity
  • 140psi max discharge pressure from start to finish
  • Use with Oil or Grease (up to NLGI #2)
  • Remote mount up to 6 feet from the lube point
  • Use in a wide temperature range

All MEMOLUB lubricators are designed with a transparent housing for quick visual inspection of the lubricant level.

Simple Programming

The MEMOLUB® EM daily lubricant output is programmed using the simple colored MEMO system. The Red and White timing MEMOs determine how long it takes to empty the lubricant cartridge.

Memolub EM - Memos | Power Lube Industrial

There are two basic time settings; 12 and 24 month ideally suited for electric motors. Once the appropriate colored MEMO is installed, the program is retained in the MEMO fitting, and at the lube point, allowing the user to interchange other MEMOLUB® EM lubricators without the worry of reprogramming.

Memolub EM is Easy to Install

Grease filled lubricators come preloaded with a lubricant cartridge and battery pack for quick installation. Oil filled lubricators require installation of the lubricant cartridge and battery pack on site.

Memolub EM - Installation | Power Lube Industrial

Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.

Memolub EM Technical Drawing | Power Lube Industrial
Memolub EM Technical Drawing | Power Lube Industrial
Memolub EM Technical Drawing | Power Lube Industrial
  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Sorry, your query returned no results! The category you have chosen has no content at this time. Please try the "All Downloads" category.

Pages

Memolub
Application Case Study
Case Study No. 601
Industry:
Steel, Aluminum, Glass & Plastic
Application:
Steel Processing
Issue:
Six single-point lubricators could not generate enough pressure to overcome the back pressure from the machine. As a result, lubricant rarely reached the slides.
Solution:
The six lubricators were replaced with 1 MEMOLUB 6-point lubrication system, using the customer's existing lines. The 350psi output pressure was more than enough to reach the slides. The need to service only one lubricator, versus six, proved to be an added cost benefit.
Perma vs. Memolub | Power Lube IndustrialPerma vs. Memolub

Pages

Memolub
Application Case Study
Case Study No. 601
Application:
Steel Processing
Industry:
Steel, Aluminum, Glass & Plastic
Issue:
Six single-point lubricators could not generate enough pressure to overcome the back pressure from the machine. As a result, lubricant rarely reached the slides.
Solution:
The six lubricators were replaced with 1 MEMOLUB 6-point lubrication system, using the customer's existing lines. The 350psi output pressure was more than enough to reach the slides. The need to service only one lubricator, versus six, proved to be an added cost benefit.
Perma vs. Memolub | Power Lube IndustrialPerma vs. Memolub

Pages

Call to Order:
(800) 635-8170
Memolub
  EM Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
memolub dust cover IPM-DCSM-1
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet