Single-Point Lubricators

Automatic Motor Lubricator

MEMOLUB EM
Single-Point Lubricator

The MEMOLUB® EM is a battery powered, self-contained automatic lubricator designed for the minimal lubricant requirements of electric motors.

  • Reliable lubrication 24 hours a day, reduce downtime
  • Reusable pump - low cost replaceable lube cartridges
  • Simple 12 or 24 month duration settings
  • Battery powered - no wiring needed
  • 2 year lubricator warranty

Part Numbers:
MLEM120 - MEMOLUB® EM Model 120cc

Lubricant cartridges & battery packs sold separately - Click here for information


How to order a MEMOLUB® EM lubricator - click here .pdf

The MEMOLUB® EM lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related with manual lubrication.

  • 120cc lubricant capacity
  • 140psi max discharge pressure from start to finish
  • Use with Oil or Grease (up to NLGI #2)
  • Remote mount up to 6 feet from the lube point
  • Use in a wide temperature range

All MEMOLUB lubricators are designed with a transparent housing for quick visual inspection of the lubricant level.

Simple Programming

The MEMOLUB® EM daily lubricant output is programmed using the simple colored MEMO system. The Red and White timing MEMOs determine how long it takes to empty the lubricant cartridge.

Memolub EM - Memos | Power Lube Industrial

There are two basic time settings; 12 and 24 month ideally suited for electric motors. Once the appropriate colored MEMO is installed, the program is retained in the MEMO fitting, and at the lube point, allowing the user to interchange other MEMOLUB® EM lubricators without the worry of reprogramming.

Memolub EM is Easy to Install

Grease filled lubricators come preloaded with a lubricant cartridge and battery pack for quick installation. Oil filled lubricators require installation of the lubricant cartridge and battery pack on site.

Memolub EM - Installation | Power Lube Industrial

Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.

Memolub EM Technical Drawing | Power Lube Industrial
Memolub EM Technical Drawing | Power Lube Industrial
Memolub EM Technical Drawing | Power Lube Industrial
  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Sorry, your query returned no results! The category you have chosen has no content at this time. Please try the "All Downloads" category.

Pages

Memolub
Application Case Study
Case Study No. 821 - Rotating Dryer
Memolub - Rotating Dryer | Power Lube IndustrialMemolub - Rotating Dryer | Power Lube Industrial
Industry:
Energy Industry
Application:
Dryers
Issue:
Original Equipment Manufacturer (OEM) application.
Solution:
Installed two MEMOLUB® GIGA single-point lubricators per roller on a 1 month setting. The lubricators were mounted on the outside of the shroud for easy access.

Pages

Memolub
Application Case Study
Case Study No. 1011 - Electroimpact Wing Panel Machine
Wing Panel Machine | Power Lube IndustrialWing Panel Machine | Power Lube IndustrialWing Panel Machine | Power Lube IndustrialWing Panel Machine | Power Lube IndustrialWing Panel Machine | Power Lube Industrial
Application:
General Production Equipment
Industry:
Aerospace
Background:
Founded in June of 1986 primarily as a supplier of machine tools to Boeing, Electroimpact has positioned itself as the premier supplier of automated equipment to the worldwide aircraft industry and the largest integrator of aircraft assembly lines in the world.
Issue:
Electroimpact makes very specialized automated equipment. One such piece of equipment is this Wing Panel Machine which fully fastens airplane wings from start to finish at an astonishing rate of speed. It utilizes servo controls and electromagnetic riveting (EMR) technology to install 12 slug rivets per minute, and 8 lock bolts and collars per minute. Process tools on this equipment shuttle into position at speeds up to 2m/sec to drill, rivet, seal, and fasten wing panels into place. A lot of parts moving simultaneously at high rates of speed means frequent and consistent lubrication is necessary to ensure smooth and uninterrupted operation. Manual lubrication was quite an undertaking to ask of the end user with so many points. Electroimpact first considered using larger Lincoln-type systems but the equipment moves along 3 axis, making it very difficult (if not impossible) to run lines to all service points from one central location.
Solution:
Electroimpact decided to employ EPS-24VDC PLC-controlled lubricators to lubricate the more than 50 lube points on this piece of equipment. The (relatively) small profile of the MEMOLUB and its mounting versatility made the system ideal for installing in limited/confined areas along the equipment. A mixture of 12-point, 8-point, and 4-point systems are used to service the slides, racks (on rack-and-pinion system), rollers, and worm gears on this massive piece of equipment.
Results:
Our MEMOLUB systems have made their way into the facilities of Airbus, Boeing, Spirit Aerospace, Vought, Northrop-Grumman, Israeli Aircraft Industries, and Xi’an Aircraft of China among others by way of these highly specialized pieces of equipment. Some, like Boeing, had already been longtime customers of ours so they were familiar with the operation and maintenance of the systems. This project only served to open their eyes to more application possibilities.
Worth Mentioning:
Electro-Impact is an engineer-driven company and like many other customers of ours, required engineer drawings of our products to incorporate into their own machine designs. PLI has been able to deliver both 2D CAD and 3D STEP files to meet our customer’s needs.

Pages

Call to Order:
(800) 635-8170
Memolub
  EM Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
Memolub Standard and Mega Dust Cover
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet