Single-Point Lubricators

Memolub HPS - Single Point Lubricator | Power Lube Industrial

MEMOLUB® HPS
Single-Point Lubricator

The MEMOLUB® HPS is a diverse electromechanical lubricator that can be installed on a single lube point or coupled with a progressive distribution valve to lubricate from 2 to 12 points.
  • Reliable lubrication 24 hours a day, reduce equipment downtime
  • Reusable pump - low cost replaceable lube cartridges
  • 52 programmable duration settings
  • Battery powered - no wiring needed
  • 2 year lubricator warranty

Part Numbers:
MLHPS120 - MEMOLUB HPS Model 120cc
MLHPS240 - MEMOLUB HPS Model 240cc
MLHPS480 - MEMOLUB HPS Model 480cc

Lubricant cartridges & battery packs sold separately

How to order your MEMOLUB® HPS lubricator - click here .pdf

Memolub HPS - Single Point Lubricator - Pillow Block

The MEMOLUB® HPS lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.

  • 120, 240 or 480cc lubricant capacity 350psi max output pressure from start to finish
  • Use with Oil or Grease (up to NLGI #2)
  • Remote mount up to 40 feet from the lube point
  • Use in a wide temperature range of applications
Memolub HPS - Pillow Block Bearing

All MEMOLUB HPS models use the same motor base assembly, making it easy to convert from one lubricant capacity to another by simply purchasing a low cost transparent housing kit.

Simple MEMO Programming

The MEMOLUB® HPS daily lubricant output is programmed using the simple MEMO system. The MEMO can be programmed to control both the frequency of lube cycles and the volume of lubricant discharged. Once the MEMO is programmed and installed any MEMOLUB® HPS lubricator will recognize the settings.

Memolub Memo System Chart | Power Lube Industrial
Memolub Memo, Spacer & Timing Rings | Power Lube Industrial

Basic Frequency Settings

There are 7 basic frequency settings that are suitable for most industrial applications.  They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. This activates the lubricator program.

Memolub Memo, Spacers & Timing Rings

Adjusting the Volume of Lubricant

Included in the MEMO kit is eight spacer washers for adjusting the amount of lubricant discharged per lube cycle. Installing one, or a combination of all eight washers, into the brass MEMO fitting will limit the stroke length of the piston inside the lubricator.

Product Resources:

Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.

Memolub HPS Technical Drawing | Power Lube Industrial
Memolub HPS Technical Drawing | Power Lube Industrial
  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Sorry, your query returned no results! The category you have chosen has no content at this time. Please try the "All Downloads" category.

Pages

Memolub
Application Case Study
Case Study No. 901 Rail Lubrication
Industry:
Steel, Aluminum, Glass & Plastic
Application:
Chains & Rails
Issue:
Neglected manual lubrication
Solution:
Installed one MEMOLUB® MEGA lubricator with a 2-Point Splitter on a 3 month setting using Olista LT2 grease.
Rail Lubrication | Power Lube Industrial

Pages

Memolub
Application Case Study
Case Study No. 901 Rail Lubrication
Application:
Chains & Rails
Industry:
Steel, Aluminum, Glass & Plastic
Issue:
Neglected manual lubrication
Solution:
Installed one MEMOLUB® MEGA lubricator with a 2-Point Splitter on a 3 month setting using Olista LT2 grease.
Rail Lubrication | Power Lube Industrial

Pages

Call to Order:
(800) 635-8170
Memolub
  HPS Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
memolub dust cover IPM-DCSM-1
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet