Single-Point Lubricators

Memolub HPS - Single Point Automatic Lubricator | Power Lube Industrial

MEMOLUB® HPS
Single-Point Lubricator

The MEMOLUB® HPS is a diverse electromechanical lubricator that can be installed on a single lube point or coupled with a progressive distribution valve to lubricate from 2 to 12 points. You can depend on Memolub HPS automatic single point lubricators.
  • Reliable lubrication 24 hours a day, reduce equipment downtime
  • Reusable pump - low cost replaceable lube cartridges
  • 52 programmable duration settings
  • Battery powered - no wiring needed
  • 2 year lubricator warranty

Memolubs are decentralized lubricators for Conveyors, Cranes, Crushers, Pumps, Elevators, Lifts, Trains and Hoists, Industrial Robots, Rollers and Drive Assemblies, Fans and Blowers, Motors and Generators, Chains and Rails, Food Processing Equipment and more!

Memolubs solve lubrication challenges in virtually all industries from Automobile manufacturing to Mining and every thing in between.

Call our helpful Power Lube Industrial staff and we’ll work with you to determine the best lubricator model and offer you many lubricant options for your application. We stock over 200 of the most commonly used lubricants.

Part Numbers:
MLHPS120 - MEMOLUB HPS Model 120cc
MLHPS240 - MEMOLUB HPS Model 240cc
MLHPS480 - MEMOLUB HPS Model 480cc

Lubricant cartridges & battery packs sold separately

How to order your MEMOLUB® HPS lubricator - click here .pdf

Automatic Bearing Lubricator

The MEMOLUB® HPS single point lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.

  • 120, 240 or 480cc lubricant capacity 350psi max output pressure from start to finish
  • Use with Oil or Grease (up to NLGI #2)
  • Remote mount up to 40 feet from the lube point
  • Use in a wide temperature range of applications
Memolub HPS - Pillow Block Bearing

All MEMOLUB HPS models use the same motor base assembly, making it easy to convert from one lubricant capacity to another by simply purchasing a low cost transparent housing kit.

Simple MEMO Programming

The MEMOLUB® HPS daily lubricant output is programmed using the simple MEMO system. The MEMO can be programmed to control both the frequency of lube cycles and the volume of lubricant discharged. Once the MEMO is programmed and installed any MEMOLUB® HPS lubricator will recognize the settings.

Memolub Memo System - Basic Frequency settings
R
Red
W
White
B
Black
Colored timing rings Strokes per day CC's per stroke Daily output in CC's Model 120 months to empty Model 240 months to empty Model 480 months to empty
R
W
B
24 0.63 15.1 N/A 0.5 1
R
W
B
12 0.63 7.6 0.5 1 2
R
W
B
4 0.63 2.5 1.5 3 6
R
W
B
2 0.63 1.3 3 6 12
R
W
B
1.5 0.63 1 4 8 16
R
W
B
1 0.63 0.6 6 12 24
R
W
B
0.5* 0.63 0.3 12 24 N/A
* Lubrication cycles every other day (48 hours)
Memolub Memo, Spacer & Timing Rings | Power Lube Industrial

Basic Frequency Settings

There are 7 basic frequency settings that are suitable for most industrial applications.  They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. This activates the lubricator program.

Memolub Memo, Spacers & Timing Rings

Adjusting the Volume of Lubricant

Included in the MEMO kit is eight spacer washers for adjusting the amount of lubricant discharged per lube cycle. Installing one, or a combination of all eight washers, into the brass MEMO fitting will limit the stroke length of the piston inside the lubricator.

Product Resources:

Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.

Memolub HPS Technical Drawing | Power Lube Industrial
Memolub HPS Technical Drawing | Power Lube Industrial
  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Sorry, your query returned no results! The category you have chosen has no content at this time. Please try the "All Downloads" category.

Pages

Memolub
Application Case Study
Case Study No. 817 - Coil Cutting Machine
Memolub - Coil Cutting MachineRemote Fan Bearings
Industry:
Automotive
Application:
General Production Equipment
Issue:
Lubrication could only be performed when machine was stopped. This lead to irregular and infrequent lubrication.
Solution:
Installed three MEMOLUB® MEGA units with 5-Point and 8-Point distribution blocks set at 3 months. Now the machine gets regular lubrication without stopping production.

Pages

Memolub
Application Case Study
Case Study No. 031519 - Lubricating an Automated Palletiser
Memolub Automatic Lubricator -- Palletising Robot Lubrication
Application:
Elevators/Lifts/Conveyors
Industry:
Food & Beverage
Background:
Equipment was previously being manually lubricated with a grease gun. Depending on what maintenance tech performed the task, over- and under-lubrication were common-place, if done at all. Over-lubrication was especially a problem because often bearings were pushed out of the linear slides, caus-ing premature failure. The customer would spend thousands annually in repair costs as a result.
Solution:
We installed 2 MEMOLUB® ONE single-point lubricators per palletiser to supply constant lubrication to the linear slide bearings. Pro-gramming the lubricators to dispense per the manufacturer’s specs removed human inconsistency from the maintenance equa-tion thereby extending bearing life. An add-ed bonus was the ability to lubricate while the equipment is still in operation.
Results:
Reduced downtime and extended bearing life.
Worth Mentioning:

Pages

Call to Order:
(800) 635-8170
Memolub
  HPS Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
Memolub Standard and Mega Dust Cover
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet