Memolub Multi-Point MPS-05 Lubricator | Power Lube Industrial

MEMOLUB® MPS-05
Multi-Point Lubricator

The MEMOLUBĀ® MPS-05 (Multi-Point System) is a precise, reliable, and easy to install system that can lubricate 5 lube points with one lubricator.

  • Can be used with a MEMOLUBĀ® HPS, EPS or PLCd
  • Available in 120cc, 240cc or 480cc reservoir
  • Dispenses 0.6cc from 1 outlet & 0.3cc from 4 outlets
  • Grease or Oil
  • Less costly than large centralized systems
  • Low maintenance

All of the materials required are available to quickly put your MEMOLUBĀ® HPS lubricator to profitable use in a multi-point application.

Purchase prefilled nylon tubing and make installation as simple as "Plug 'n Lube"

How to order your Multi-Point System .pdf
How to order your Plug 'n Lube pre-filled nylon tubing .pdf

MEMOLUB Multi-Point Lubricator | Power Lube Industrial

The MPS-05 System consists of a MEMOLUBĀ® high pressure lubricator, a distribution valve which meters the lubricant to all lube points, a mounting bracket and push-in tube fittings for your bearings.

All MEMOLUBĀ® MPS systems have been primed before shipment and are ready for use. On first installation of the MPS system, all lube lines and bearings should be pre-charged with the same lubricant that was ordered with the MEMOLUBĀ® lubricator (prefilled tubing is available and sold separately).

This system is especially suited for applications with several lube points in close proximity.

Grease or Oil:
There are two system types available; one for grease applications and one for oil applications. When ordering, be certain to specify the system appropriate for your application.

  • Grease up to an NLGI #2
  • Oil systems may require additional check valves

Memolub MPS Resouces:
Memolub Multi-Point System Distribution Block Set-up Guide .pdf
Memolub Multi-Point System Technical Data Sheet .pdf

Optional Parts:

Protective Cover: To protect your MEMOLUBĀ® lubricator in harsher evironments we offer a nylon protective cover. This cover is sold seperately and is available for all three size lubricators.

Prefilled Nylon Tubing: Nylon tubing required to complete the installation is sold separately. The standard size tubing is 5/16ā€ OD, but other sizes are available. Tubing can be purchased two ways; pre-filled in 5 foot increments from 5 to 30 feet, or empty in any length from 1 to 100 feet.

MEMOLUB Multi-Point Lubricator | Power Lube Industrial
  • Convert your MEMOLUBĀ® lubricator to a MPS System
  • Many bearing adapters available

Contact us to learn more about the easy-to-use, effective GREASOMATIC lubricator.

  • Table based on the following:
  • - Tubing ID of 1/4" (6mm)
  • - Lube point threads no less than 1/8" NPT
  • - No inner pressure present in the component
  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Memolub MPS Downloads
Multi-Point Lubrication Distribution Block Set-up On each complete cycle of the Distribution Block, each output port ejects .3 cc's of lubricant. When 2 output ports are coupled using either the horizontal or vertical coupler, one of the output ports is blocked and its output diverted to the second port. The bearing that is connected to a coupled output port receives the lubricant from both ports or .6 cc's per cycle of the Distribution Block.Ā Ā Ā .....Download
ORDERING INFORMATION SHEET - How to order a new Replacement Lubricant Cartridge Kit for your MEMOLUBĀ® lubricator - Power Lube Industrial stocks over 200 lubricants to meet your equipment requirements. Our Lube List is constantly changing so if your lubricant is not listed please give us a call. - Example: To order a lubricant Replacement Kit for a previously purchased MEMOLUB Model 240HPS lubricator filled with Mobilgrease XHP-222, the part number would be: ā€œK4MOBXHP222ā€.Ā Ā Ā .....Download
How to order your ā€œPlug ā€˜n Lubeā€ pre-filled nylon tubing to quickly install your MEMOLUBĀ® lubricator - Power Lube Industrial stocks over 200 lubricants to meet your equipment requirements. Our Lube List is constantly changing so if your lubricant is not listed please give us a call. - Example: To order 20 feet of 5/16ā€ O.D. tubing filled with Mobilgrease XHP-222 the pre-filled nylon tubing the part number would be: ā€œTB5820MOBXHP222ā€.Ā Ā Ā .....Download
How to Order a MEMOLUBĀ® High Pressure Lubricator - There are two steps to ordering a new MEMOLUBĀ® lubricator - Step 1: Choose the model and size of the MEMOLUBĀ® lubricator - Step 2: Order the Lubricant Cartridge Kit for the MEMOLUBĀ® lubricator Ā Ā Ā .....Download
MEMOLUBĀ® MPS System The MEMOLUBĀ® MPS (Multi-Point System) converts any model MEMOLUBĀ® lubricator into a compact central lube system. It is precise, reliable, and cost effective. The system consists of a MEMOLUBĀ® lubricator, a distribution block which apportions the lubricant equally to all lube points, a mounting bracket and all the push-in tube fittings youā€™ll need to quickly put your MEMOLUBĀ® lubricator to profitable use in a multi-point application. The MEMOLUBĀ® MPS ā€œPlug ā€˜n LubeTMā€ system is quick and easy to install. Simply mount the system in an accessible location, install the quick connect fittings on all lube points and plug in the pre-filled tubing between the two.Ā Ā Ā .....Download
2-Point Lubrication System The 2-Point MEMOLUBĀ® System is especially designed for the economical lubrication of two bearing shaft systems, for example, electric motors, pumps, fans, etc. The Splitter-MEMO evenly divides the volume of lubricant during each ejection cycle of the MEMOLUBĀ® HPS lubricator. It transforms a single MEMOLUBĀ® HPS lubricator into a two-outlet lubricating system. The 2-Point MEMOLUBĀ® System includes a MEMOLUBĀ® HPS lubricator with Splitter-MEMO and push-in tube fittings installed on a Mounting Bracket. Tubing and push-in bearing fittings are purchased separately. Tubing in various lengths, pre-filled with the desired lubricant, is also available to further simplify the installation process. The system can be used with any of the three sizes of MEMOLUBĀ® HPS lubricators, the Standard Model 120, the Mega Model 240 and the Giga Model 480. They can also be used with any of the power options available with the MEMOLUBĀ®. The 2-Point MemolubĀ® System can be used only in grease applications.Ā Ā Ā .....Download
Ordering a MEMOLUB High Pressure Multi-Point Lubrication System is made easy with this ordering guide.Ā Ā Ā .....Download

Pages

Memolub
Application Case Study
Case Study No. 403
Industry:
Automotive
Application:
Industrial Washer
Issue:
An industrial washer in a truck engine plant has a pump and an orientation gear. The customer was using "gas generator" type lubricators to service the 3 pump bearings and orientation gear. Pump bearings were failing because the lubricant was getting clogged in the lines. The lubricators servicing the orientation gear were neglected because they were located inside the gear's protective cage, making them difficult to access. Months of no lubrication led to premature tooth wear.
Solution:
All single-use lubricators were replaced with two 3-point lubrication systems. For the orientation gear, the lubrication system was remote-mounted outside the cage, for easy access. This not only made visual inspection of the lubs level easier, but also allowed for quick servicing of the lube system without the need for shutting down the washer.

Pages

Memolub
Application Case Study
Case Study No. 403
Application:
Industrial Washer
Industry:
Automotive
Issue:
An industrial washer in a truck engine plant has a pump and an orientation gear. The customer was using "gas generator" type lubricators to service the 3 pump bearings and orientation gear. Pump bearings were failing because the lubricant was getting clogged in the lines. The lubricators servicing the orientation gear were neglected because they were located inside the gear's protective cage, making them difficult to access. Months of no lubrication led to premature tooth wear.
Solution:
All single-use lubricators were replaced with two 3-point lubrication systems. For the orientation gear, the lubrication system was remote-mounted outside the cage, for easy access. This not only made visual inspection of the lubs level easier, but also allowed for quick servicing of the lube system without the need for shutting down the washer.

Pages

Call to Order:
(800) 635-8170
Memolub
Ā Ā MPS-05 Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
memolub dust cover IPM-DCSM-1
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet