Single-Point Lubricators

Memolub PLCd | Power Lube Industrial

MEMOLUB® 24VDC-PLCd
Single-Point Lubricator

The MEMOLUB 24VDC-PLCd-Control model electromechanical lubricator is the ultimate in single-point or multi-point lubrication. Gives you complete control of your lubrication program.
  • Integrates with Programmable Logic Controllers
  • Control Frequency and Duration of each Output Cycle
  • Use in a Wide Variety of Applications; Mobile Equipment, Robots, Conveyors and OEM …….
  • Powered by an External 24VDC Power Supply
  • Replaceable Cartridge

Part Numbers:
MLPLCD120 - MEMOLUB PLCD Model 120cc
MLPLCD240 - MEMOLUB PLCD Model 240cc
MLPLCD480 - MEMOLUB PLCD Model 480cc

Lubricant cartridges & battery packs sold separately

How to order your MEMOLUB® PLCd lubricator - click here .pdf

Memolub PLCd - Pillow Block | Power Lube Industrial
The MEMOLUB® PLCd is powered and programmed by your PLC and automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.
  • 120, 240 or 480cc lubricant capacity
  • 350psi max output pressure from start to finish
  • Use with Oil or Grease (up to NLGI #2)
  • Remote mount up to 40 feet from the lube point
Memolub PLCd - Pillow Block Bearing
Memolub - Power-Thru-Memo | Power Lube Industrial
Power Through Memo & Washers

The MEMOLUB® 24VDC-PLCd Control lubricator has a unique design utilizing a Power-Through Memo which contains the electrical connections needed to power the unit. This gives the user the ability to quickly remove the lubricator for fast lubricant cartridge change-out while avoiding need to disconnect the electrical connections.

A 5-foot extension cable on the Power-Through Memo is connected to a PLC-controlled power supply. The PLC program controls the frequency of lubrication output cycles, which may be based upon elapsed clock hours, machine cycles, a count of parts produced, or other desired criteria.

Product Resources:

Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.

Memolub PLCd Technical Drawing | Power Lube Industrial
Memolub PLCd Technical Drawing | Power Lube Industrial
  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Memolub PLCd Downloads
An orthographic projection technical drawing of the Memolub Model 240 - HPS, EPC, EPS, PLCd   .....Download
An orthographic projection technical drawing of the Memolub Model 480 - HPS, EPC, EPS, PLCd   .....Download
The versatility of the MEMOLUB® Lubrication Systems is widely recognized and highly regarded in industry today as a valuable asset in controlled lubrication. For years the MEMOLUB® automatic lubricator has helped hundreds of industries improve reliability and cost savings throughout their facilities. The MEMOLUB® offers advanced lubrication control by applying a precise amount of clean lubricant at the correct time intervals.   .....Download
The MEMOLUB® HPS is an automatic, self-contained, electro-mechanical lubricator. The "HPS" in its name stands for High Pressure System. It ejects grease or oil under programmable control at an output pressure of 350psi. There are three available models:   .....Download
To open the lubricator, place it upright on a flat surface. With one hand on top of the transparent housing, press firmly. With the other hand, hold the ribbed surface of the locking ring and turn it counter-clockwise. Remove the locking ring and the transparent housing.   .....Download
Adobe Acrobat Reader website Adobe Reader XI does more than ever. So you can, too. Adobe Reader software is the free trusted standard for reliably viewing, printing, and annotating PDF documents. It’s the only PDF file viewer that can open and interact with all types of PDF content, including forms and multimedia.

Pages

Memolub
Application Case Study
Case Study No. 607
 Vertical Machining Center | Power Lube Industrial Vertical Machining Center | Power Lube Industrial
Industry:
Automotive
Application:
Machining Center
Issue:
Manual lubrication was done on an inconsistent basis, and often not at all on this vertical machining center.
Solution:
Two 6-Point MEMOLUB lubrication systems were placed inside the machine to service all lube points, while the lubricators were mounted outside the cabinet, for easy lube cartridge replacement and visual inspection.

Pages

Memolub
Application Case Study
Case Study No. 052119 - Lubricating Bottle Crusher Machine Bearings
Memolub 12-Point Lubrication System
Application:
General Production Equipment
Industry:
Food & Beverage
Background:
Equipment operated 24/7 making it very difficult to stop for the required maintenance intervals. To lubricate the 12 bearings, the machine had to be completely shut down and locked out and access to the bearings required several panels be removed. When lubrication was done, it was done so very quickly in order to get the equipment back up and running. This led to inadequate, and sometimes completely missed, lubrication.
Solution:
We installed a MEMOLUB® 12-point Multi-Point System to supply constant lubrication to the bearings, while the bottle crusher remained in operation. The lubrication system was mounting to the outside of the equipment, making it possible to replenish the lubricant supply without shutting down the equipment. This was a huge advantage as it allowed maintenance technicians to avoid time-consuming lock-out/tag-out procedures while still remaining compliant.
Worth Mentioning:
Multi-Point Systems with more than 8 outlets have restrictions on tubing OD, tubing length and the viscosity of the lubricant. Please call our staff at 800-635-8170 to answer any questions about sizing and installing your MPS System.

Pages

Call to Order:
(800) 635-8170
Memolub
  PLCd Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
Memolub Standard and Mega Dust Cover
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet