- Single-Point Lubricators
- Multi-Point Lubricators
- Industrial Fittings
The MEMOLUBÂ® EM is a battery powered, self-contained automatic lubricator designed for the minimal lubricant requirements of electric motors.
The MEMOLUBÂ® EM lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related with manual lubrication.
All MEMOLUB lubricators are designed with a transparent housing for quick visual inspection of the lubricant level.
The MEMOLUBÂ® EM daily lubricant output is programmed using the simple colored MEMO system. The Red and White timing MEMOs determine how long it takes to empty the lubricant cartridge.
There are two basic time settings; 12 and 24 month ideally suited for electric motors. Once the appropriate colored MEMO is installed, the program is retained in the MEMO fitting, and at the lube point, allowing the user to interchange other MEMOLUBÂ® EM lubricators without the worry of reprogramming.
Memolub EM is Easy to Install
Grease filled lubricators come preloaded with a lubricant cartridge and battery pack for quick installation. Oil filled lubricators require installation of the lubricant cartridge and battery pack on site.
Case Study No. 808
Rollers & Drive Assembly - Municipal water treatment facility
Facility was using gas-generated, electrochemical lubricators on each lube point.
These lubricators produced inconsistent lubrication due to insufficient output pressure and temperature variations.
Solution 1 : Four Giga 8-point MEMOLUBÂ® lubrication systems replaced 32 electrochemical lubricators. These systems were installed to lubricate the rollers on the water softener equipment. While the equipment turns, the MEMOLUBÂ® automatically delivers a consistent, time-controlled, metered quantity of lubricant to all rollers. Solution 2: One Mega 3-point MEMOLUBÂ® lubrication system was installed to lubricate the drive gear assembly. Two outlets lubricate the drive gear bearings and one outlet drops grease directly onto the open gear. Solution 3: One 2 point MEMOLUBÂ® Splitter system was installed to apply grease directly to the top and side of inner rail using brushes.
Lubrication while the machine is in operation ensures that the lubricant is evenly and optimally distributed. This results in decreased lubricant consumption and increased machine life. In addition, the installation of a MEMOLUB multi-point system drastically reduces the likelihood of contamination from excess grease.
|Product Description||Item Number|
||See MEMOLUB Replacement Kits page|
|See Pre-filled Tubing Data Sheet|