Single-Point Lubricators

This product has been discontinued. Replacement lubricant kits are still available. Call 800-635-8170 for assistance.

MEMOLUB® EPC
Single-Point Lubricator

The MEMOLUB® EPC is an externally controlled electromechanical lubricator that can be installed on a single lube point or coupled with a progressive distribution valve to lubricate from 2 to 12 points. This model can be wired to an external switch, relay or PLC to give you the on/off lubrication required for intermittently used equipment.
  • Reliable lubrication when you want it, reduce equipment downtime
  • Reusable pump - low cost replaceable lube cartridges
  • 52 programmable duration settings
  • Battery powered with external on/off function
  • 2 year lubricator warranty

Part Numbers:
MLEPC120 - MEMOLUB EPC Model 120cc
MLEPC240 - MEMOLUB EPC Model 240cc
MLEPC480 - MEMOLUB EPC Model 480cc

Lubricant cartridges & battery packs sold separately

How to order your MEMOLUB® EPC lubricator - click here .pdf

Memolub EPC Pillow Block

The MEMOLUB® EPC lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.

  • 120, 240 or 480cc lubricant capacity
  • 350psi max output pressure from start to finish
  • Use with Oil or Grease (up to NLGI #2)
  • Remote mount up to 40 feet from the lube point
  • Use in intermittently used applications
Memolub EPC - Pillow Block Bearing

All MEMOLUB® EPC models use the same motor base assembly, making it easy to convert from one lubricant capacity to another by simply purchasing a low cost transparent housing kit.

The on/off function of the MEMOLUB® EPC is controlled by an external switch. The 12 inch cable that extends from the bottom of the lubricator serves to interrupt the electric circuit to the drive motor. When a switch or relay closes the circuit, the MEMOLUB® EPC first goes through an output cycle and then proceeds to operate under its own preset program control. When the circuit is opened the lubrication process stops

Simple MEMO Programming

The MEMOLUB® EPC lubricant output is programmed using the simple MEMO system. It consists of a brass MEMO fitting, a black plastic timing-ring holder, and three plastic timing rings (one white, one red, and one black). The MEMO can be programmed to control both the frequency of lube cycles and the volume of lubricant discharged. Once the MEMO is programmed and installed any MEMOLUB® EPC lubricator will recognize the settings. The program settings can be changed at any time, should your application require more or less lubricant.

Memolub Memo System Chart | Power Lube Industrial
Memolub Memo, Spacer & Timing Rings | Power Lube Industrial

Basic Frequency Settings

There are 7 basic frequency settings that are suitable for most industrial applications.  They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. This activates the lubricator program.

Note: The "Months to Empty" is based on continuous use of the MEMOLUB® EPC lubricator. The lubricant cartridge will last longer with intermittent use.
Memolub Memo, Spacers & Timing Rings

Adjusting the Volume of Lubricant

Included in the MEMO kit is eight spacer washers for adjusting the amount of lubricant discharged per lube cycle. Installing one, or a combination of all eight washers, into the brass MEMO fitting will limit the stroke length of the piston inside the lubricator.

Product Resources:

Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.

  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Sorry, your query returned no results! The category you have chosen has no content at this time. Please try the "All Downloads" category.

Pages

Memolub
Application Case Study
Case Study No. 030119 - Lubricating Conveyor Bearings
Conveyor bearing lubrication -- Memolub HPS Battery Operated Lubricator
Industry:
Steel, Aluminum, Glass & Plastic
Application:
Elevators/Lifts/Conveyors
Background:
This steel mill operating 24/7 was manually lubricating the conveyor bearings.
Issue:
The daily manual lubrication procedure on the conveyor bearings were time consuming and often forgotten due to the inaccessibility and harsh environment.
Solution:
The 350psi output pressure of the MEMOLUB® HPS 480 allowed the lubricators to be mounted in a safe location outside the guarding with lube lines running to the bearings.
Results:
The MEMOLUB® provided continuous supply of lubricant to each bearing which reduced production downtime, bearing failures man hours.
Worth Mentioning:
They used braided rubber hose to prevent damage to the lube lines in the harsh environment.

Pages

Call to Order:
(800) 635-8170
Memolub
  EPC Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
Memolub Standard and Mega Dust Cover
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet