Part Numbers:
MLEPC120 - MEMOLUB EPC Model 120cc
MLEPC240 - MEMOLUB EPC Model 240cc
MLEPC480 - MEMOLUB EPC Model 480cc
Lubricant cartridges & battery packs sold separately
How to order your MEMOLUB® EPC lubricator - click here .pdf
The MEMOLUB® EPC lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.
All MEMOLUB® EPC models use the same motor base assembly, making it easy to convert from one lubricant capacity to another by simply purchasing a low cost transparent housing kit.
The on/off function of the MEMOLUB® EPC is controlled by an external switch. The 12 inch cable that extends from the bottom of the lubricator serves to interrupt the electric circuit to the drive motor. When a switch or relay closes the circuit, the MEMOLUB® EPC first goes through an output cycle and then proceeds to operate under its own preset program control. When the circuit is opened the lubrication process stops
Simple MEMO Programming
The MEMOLUB® EPC lubricant output is programmed using the simple MEMO system. It consists of a brass MEMO fitting, a black plastic timing-ring holder, and three plastic timing rings (one white, one red, and one black). The MEMO can be programmed to control both the frequency of lube cycles and the volume of lubricant discharged. Once the MEMO is programmed and installed any MEMOLUB® EPC lubricator will recognize the settings. The program settings can be changed at any time, should your application require more or less lubricant.
Basic Frequency Settings
There are 7 basic frequency settings that are suitable for most industrial applications. They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. This activates the lubricator program.
Adjusting the Volume of Lubricant
Included in the MEMO kit is eight spacer washers for adjusting the amount of lubricant discharged per lube cycle. Installing one, or a combination of all eight washers, into the brass MEMO fitting will limit the stroke length of the piston inside the lubricator.Product Resources:
Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.
Case Study No. 602 Application: General Production Equipment Industry: Cement Issue: Lubrication was done manually, and only when the machine was able to be shut down. Also, cement contamination introduced at the zerks caused seal blockage and the turbine stopped from the resulting pressure build-up. Solution: Two 5-Point MEMOLUB lubrication systems were installed to service all the lube points automatically, at regular intervals. Lubricators were placed in a convenient location so that the lube cartridges could be changed without shutting down the machine. |
||
|
---|
Product Description | Item Number | |
---|---|---|
|
IPMLLBK-2 | |
|
See MEMOLUB Replacement Kits page | |
|
IPM-DCSM-1 | |
|
See Pre-filled Tubing Data Sheet | |
|