Memolubs are decentralized lubricators for Conveyors, Cranes, Crushers, Pumps, Elevators, Lifts, Trains and Hoists, Industrial Robots, Rollers and Drive Assemblies, Fans and Blowers, Motors and Generators, Chains and Rails, Food Processing Equipment and more!
Memolubs solve lubrication challenges in virtually all industries from Automobile manufacturing to Mining and every thing in between.
Call our helpful Power Lube Industrial staff and we’ll work with you to determine the best lubricator model and offer you many lubricant options for your application. We stock over 200 of the most commonly used lubricants.
Part Numbers:
MLHPS120 - MEMOLUB HPS Model 120cc
MLHPS240 - MEMOLUB HPS Model 240cc
MLHPS480 - MEMOLUB HPS Model 480cc
Lubricant cartridges & battery packs sold separately
The MEMOLUB® HPS single point lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.
All MEMOLUB HPS models use the same motor base assembly, making it easy to convert from one lubricant capacity to another by simply purchasing a low cost transparent housing kit.
Simple MEMO Programming
The MEMOLUB® HPS daily lubricant output is programmed using the simple MEMO system. The MEMO can be programmed to control both the frequency of lube cycles and the volume of lubricant discharged. Once the MEMO is programmed and installed any MEMOLUB® HPS lubricator will recognize the settings.
Colored timing rings | Strokes per day | CC's per stroke | Daily output in CC's | Model 120 months to empty | Model 240 months to empty | Model 480 months to empty | |
---|---|---|---|---|---|---|---|
R
W
B
|
24 | 0.63 | 15.1 | N/A | 0.5 | 1 | |
R
W
|
12 | 0.63 | 7.6 | 0.5 | 1 | 2 | |
R
B
|
4 | 0.63 | 2.5 | 1.5 | 3 | 6 | |
R
|
2 | 0.63 | 1.3 | 3 | 6 | 12 | |
W
B
|
1.5 | 0.63 | 1 | 4 | 8 | 16 | |
W
|
1 | 0.63 | 0.6 | 6 | 12 | 24 | |
B
|
0.5* | 0.63 | 0.3 | 12 | 24 | N/A | |
* Lubrication cycles every other day (48 hours) |
Basic Frequency Settings
There are 7 basic frequency settings that are suitable for most industrial applications. They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUB® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. This activates the lubricator program.
Adjusting the Volume of Lubricant
Included in the MEMO kit is eight spacer washers for adjusting the amount of lubricant discharged per lube cycle. Installing one, or a combination of all eight washers, into the brass MEMO fitting will limit the stroke length of the piston inside the lubricator.Product Resources:
Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.
Case Study No. 1011 - Electroimpact Wing Panel Machine Application: General Production Equipment Industry: Aerospace Background: Founded in June of 1986 primarily as a supplier of machine tools to Boeing, Electroimpact has positioned itself as the premier supplier of automated equipment to the worldwide aircraft industry and the largest integrator of aircraft assembly lines in the world. Issue: Electroimpact makes very specialized automated equipment. One such piece of equipment is this Wing Panel Machine which fully fastens airplane wings from start to finish at an astonishing rate of speed. It utilizes servo controls and electromagnetic riveting (EMR) technology to install 12 slug rivets per minute, and 8 lock bolts and collars per minute. Process tools on this equipment shuttle into position at speeds up to 2m/sec to drill, rivet, seal, and fasten wing panels into place.
A lot of parts moving simultaneously at high rates of speed means frequent and consistent lubrication is necessary to ensure smooth and uninterrupted operation. Manual lubrication was quite an undertaking to ask of the end user with so many points. Electroimpact first considered using larger Lincoln-type systems but the equipment moves along 3 axis, making it very difficult (if not impossible) to run lines to all service points from one central location. Solution: Electroimpact decided to employ EPS-24VDC PLC-controlled lubricators to lubricate the more than 50 lube points on this piece of equipment. The (relatively) small profile of the MEMOLUB and its mounting versatility made the system ideal for installing in limited/confined areas along the equipment. A mixture of 12-point, 8-point, and 4-point systems are used to service the slides, racks (on rack-and-pinion system), rollers, and worm gears on this massive piece of equipment. Results: Our MEMOLUB systems have made their way into the facilities of Airbus, Boeing, Spirit Aerospace, Vought, Northrop-Grumman, Israeli Aircraft Industries, and Xi’an Aircraft of China among others by way of these highly specialized pieces of equipment. Some, like Boeing, had already been longtime customers of ours so they were familiar with the operation and maintenance of the systems. This project only served to open their eyes to more application possibilities. Worth Mentioning: Electro-Impact is an engineer-driven company and like many other customers of ours, required engineer drawings of our products to incorporate into their own machine designs. PLI has been able to deliver both 2D CAD and 3D STEP files to meet our customer’s needs. |
||
|
---|
Product Description | Item Number | |
---|---|---|
|
IPMLLBK-2 | |
|
See MEMOLUB Replacement Kits page | |
|
IPM-DCSM-1 | |
|
See Pre-filled Tubing Data Sheet | |
|