- Single-Point Lubricators
- Multi-Point Lubricators
- Industrial Fittings
The MEMOLUBÂ® MPS-03 (Multi-Point System) is a precise, reliable, and easy to install system that can lubricate 3 lube points with one lubricator.
All of the materials required are available to quickly put your MEMOLUBÂ® HPS lubricator to profitable use in a multi-point application.
Purchase prefilled nylon tubing and make installation as simple as "Plug 'n Lube"
The MPS-03 System consists of a MEMOLUBÂ® high pressure lubricator, a distribution valve which meters the lubricant to all lube points, a mounting bracket and push-in tube fittings for your bearings.
All MEMOLUBÂ® MPS systems have been primed before shipment and are ready for use. On first installation of the MPS system, all lube lines and bearings should be pre-charged with the same lubricant that was ordered with the MEMOLUBÂ® lubricator (prefilled tubing is available and sold separately).
This system is especially suited for applications with several lube points in close proximity.
Grease or Oil:
There are two system types available; one for grease applications and one for oil applications. When ordering, be certain to specify the system appropriate for your application.
Memolub MPS Resouces:
Memolub Multi-Point System Distribution Block Set-up Guide .pdf
Memolub Multi-Point System Technical Data Sheet .pdf
Protective Cover: To protect your MEMOLUBÂ® lubricator in harsher evironments we offer a nylon protective cover. This cover is sold seperately and is available for all three size lubricators.
Prefilled Nylon Tubing: Nylon tubing required to complete the installation is sold separately. The standard size tubing is 5/16â€ť OD, but other sizes are available. Tubing can be purchased two ways; pre-filled in 5 foot increments from 5 to 30 feet, or empty in any length from 1 to 100 feet.
Case Study No. 818 -- Rotating Furnace
Oil lubrication dispensed by an inadequate central lubrication system leading to over-lubrication, pollution, wear of the rollers and heavy vibration of the furnace.
Installed MEMOLUBÂ® GIGA lubricators initially set at a 15 day setting. After further inspection the setting was changed to 1 month. After 2 months, wear has been reduced along with furnce vibration. No more spillage and pollution. Shown here are MEMOLUB's protected with plastic bags against the harsh enviroment.
|Product Description||Item Number|
||See MEMOLUB Replacement Kits page|
|See Pre-filled Tubing Data Sheet|