- Single-Point Lubricators
- Multi-Point Lubricators
- Industrial Fittings
The MEMOLUBÂ® MPS-04 (Multi-Point System) is a precise, reliable, and easy to install system that can lubricate 4 lube points with one lubricator.
All of the materials required are available to quickly put your MEMOLUBÂ® HPS lubricator to profitable use in a multi-point application.
Purchase prefilled nylon tubing and make installation as simple as "Plug 'n Lube"
The MPS-04 System consists of a MEMOLUBÂ® high pressure lubricator, a distribution valve which meters the lubricant to all lube points, a mounting bracket and push-in tube fittings for your bearings.
All MEMOLUBÂ® MPS systems have been primed before shipment and are ready for use. On first installation of the MPS system, all lube lines and bearings should be pre-charged with the same lubricant that was ordered with the MEMOLUBÂ® lubricator (prefilled tubing is available and sold separately).
This system is especially suited for applications with several lube points in close proximity.
Grease or Oil:
There are two system types available; one for grease applications and one for oil applications. When ordering, be certain to specify the system appropriate for your application.
Protective Cover: To protect your MEMOLUBÂ® lubricator in harsher evironments we offer a nylon protective cover. This cover is sold seperately and is available for all three size lubricators.
Prefilled Nylon Tubing: Nylon tubing required to complete the installation is sold separately. The standard size tubing is 5/16â€ť OD, but other sizes are available. Tubing can be purchased two ways; pre-filled in 5 foot increments from 5 to 30 feet, or empty in any length from 1 to 100 feet.
Case Study No. 403
An industrial washer in a truck engine plant has a pump and an orientation gear. The customer was using "gas generator" type lubricators to service the 3 pump bearings and orientation gear. Pump bearings were failing because the lubricant was getting clogged in the lines. The lubricators servicing the orientation gear were neglected because they were located inside the gear's protective cage, making them difficult to access. Months of no lubrication led to premature tooth wear.
All single-use lubricators were replaced with two 3-point lubrication systems. For the orientation gear, the lubrication system was remote-mounted outside the cage, for easy access. This not only made visual inspection of the lubs level easier, but also allowed for quick servicing of the lube system without the need for shutting down the washer.
|Product Description||Item Number|
||See MEMOLUB Replacement Kits page|
|See Pre-filled Tubing Data Sheet|