Single-Point Lubricators

Memolub PLCd | Power Lube Industrial

MEMOLUB® 24VDC-PLCd
Single-Point Lubricator

The MEMOLUB 24VDC-PLCd-Control model electromechanical lubricator is the ultimate in single-point or multi-point lubrication. Gives you complete control of your lubrication program.
  • Integrates with Programmable Logic Controllers
  • Control Frequency and Duration of each Output Cycle
  • Use in a Wide Variety of Applications; Mobile Equipment, Robots, Conveyors and OEM …….
  • Powered by an External 24VDC Power Supply
  • Replaceable Cartridge

Part Numbers:
MLPLCD120 - MEMOLUB PLCD Model 120cc
MLPLCD240 - MEMOLUB PLCD Model 240cc
MLPLCD480 - MEMOLUB PLCD Model 480cc

Lubricant cartridges & battery packs sold separately

How to order your MEMOLUB® PLCd lubricator - click here .pdf

Memolub PLCd - Pillow Block | Power Lube Industrial
The MEMOLUB® PLCd is powered and programmed by your PLC and automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.
  • 120, 240 or 480cc lubricant capacity
  • 350psi max output pressure from start to finish
  • Use with Oil or Grease (up to NLGI #2)
  • Remote mount up to 40 feet from the lube point
Memolub PLCd - Pillow Block Bearing
Memolub - Power-Thru-Memo | Power Lube Industrial
Power Through Memo & Washers

The MEMOLUB® 24VDC-PLCd Control lubricator has a unique design utilizing a Power-Through Memo which contains the electrical connections needed to power the unit. This gives the user the ability to quickly remove the lubricator for fast lubricant cartridge change-out while avoiding need to disconnect the electrical connections.

A 5-foot extension cable on the Power-Through Memo is connected to a PLC-controlled power supply. The PLC program controls the frequency of lubrication output cycles, which may be based upon elapsed clock hours, machine cycles, a count of parts produced, or other desired criteria.

Product Resources:

Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.

Memolub PLCd Technical Drawing | Power Lube Industrial
Memolub PLCd Technical Drawing | Power Lube Industrial
  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Sorry, your query returned no results! The category you have chosen has no content at this time. Please try the "All Downloads" category.

Pages

Memolub
Application Case Study
Case Study No. 1011 - Electroimpact Wing Panel Machine
Wing Panel Machine | Power Lube IndustrialWing Panel Machine | Power Lube IndustrialWing Panel Machine | Power Lube IndustrialWing Panel Machine | Power Lube IndustrialWing Panel Machine | Power Lube Industrial
Industry:
Aerospace
Application:
General Production Equipment
Background:
Founded in June of 1986 primarily as a supplier of machine tools to Boeing, Electroimpact has positioned itself as the premier supplier of automated equipment to the worldwide aircraft industry and the largest integrator of aircraft assembly lines in the world.
Issue:
Electroimpact makes very specialized automated equipment. One such piece of equipment is this Wing Panel Machine which fully fastens airplane wings from start to finish at an astonishing rate of speed. It utilizes servo controls and electromagnetic riveting (EMR) technology to install 12 slug rivets per minute, and 8 lock bolts and collars per minute. Process tools on this equipment shuttle into position at speeds up to 2m/sec to drill, rivet, seal, and fasten wing panels into place. A lot of parts moving simultaneously at high rates of speed means frequent and consistent lubrication is necessary to ensure smooth and uninterrupted operation. Manual lubrication was quite an undertaking to ask of the end user with so many points. Electroimpact first considered using larger Lincoln-type systems but the equipment moves along 3 axis, making it very difficult (if not impossible) to run lines to all service points from one central location.
Solution:
Electroimpact decided to employ EPS-24VDC PLC-controlled lubricators to lubricate the more than 50 lube points on this piece of equipment. The (relatively) small profile of the MEMOLUB and its mounting versatility made the system ideal for installing in limited/confined areas along the equipment. A mixture of 12-point, 8-point, and 4-point systems are used to service the slides, racks (on rack-and-pinion system), rollers, and worm gears on this massive piece of equipment.
Results:
Our MEMOLUB systems have made their way into the facilities of Airbus, Boeing, Spirit Aerospace, Vought, Northrop-Grumman, Israeli Aircraft Industries, and Xi’an Aircraft of China among others by way of these highly specialized pieces of equipment. Some, like Boeing, had already been longtime customers of ours so they were familiar with the operation and maintenance of the systems. This project only served to open their eyes to more application possibilities.
Worth Mentioning:
Electro-Impact is an engineer-driven company and like many other customers of ours, required engineer drawings of our products to incorporate into their own machine designs. PLI has been able to deliver both 2D CAD and 3D STEP files to meet our customer’s needs.

Pages

Memolub
Application Case Study
Case Study No. 821 - Rotating Dryer
Memolub - Rotating Dryer | Power Lube IndustrialMemolub - Rotating Dryer | Power Lube Industrial
Application:
Dryers
Industry:
Energy Industry
Issue:
Original Equipment Manufacturer (OEM) application.
Solution:
Installed two MEMOLUB® GIGA single-point lubricators per roller on a 1 month setting. The lubricators were mounted on the outside of the shroud for easy access.

Pages

Call to Order:
(800) 635-8170
Memolub
  PLCd Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
Memolub Standard and Mega Dust Cover
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet