Single-Point Lubricators

Memolub PLCd | Power Lube Industrial

MEMOLUB® 24VDC-PLCd
Single-Point Lubricator

The MEMOLUB 24VDC-PLCd-Control model electromechanical lubricator is the ultimate in single-point or multi-point lubrication. Gives you complete control of your lubrication program.
  • Integrates with Programmable Logic Controllers
  • Control Frequency and Duration of each Output Cycle
  • Use in a Wide Variety of Applications; Mobile Equipment, Robots, Conveyors and OEM …….
  • Powered by an External 24VDC Power Supply
  • Replaceable Cartridge

Part Numbers:
MLPLCD120 - MEMOLUB PLCD Model 120cc
MLPLCD240 - MEMOLUB PLCD Model 240cc
MLPLCD480 - MEMOLUB PLCD Model 480cc

Lubricant cartridges & battery packs sold separately

How to order your MEMOLUB® PLCd lubricator - click here .pdf

Memolub PLCd - Pillow Block | Power Lube Industrial
The MEMOLUB® PLCd is powered and programmed by your PLC and automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.
  • 120, 240 or 480cc lubricant capacity
  • 350psi max output pressure from start to finish
  • Use with Oil or Grease (up to NLGI #2)
  • Remote mount up to 40 feet from the lube point
Memolub PLCd - Pillow Block Bearing
Memolub - Power-Thru-Memo | Power Lube Industrial
Power Through Memo & Washers

The MEMOLUB® 24VDC-PLCd Control lubricator has a unique design utilizing a Power-Through Memo which contains the electrical connections needed to power the unit. This gives the user the ability to quickly remove the lubricator for fast lubricant cartridge change-out while avoiding need to disconnect the electrical connections.

A 5-foot extension cable on the Power-Through Memo is connected to a PLC-controlled power supply. The PLC program controls the frequency of lubrication output cycles, which may be based upon elapsed clock hours, machine cycles, a count of parts produced, or other desired criteria.

Product Resources:

Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.

Memolub PLCd Technical Drawing | Power Lube Industrial
Memolub PLCd Technical Drawing | Power Lube Industrial
  1. Lower temperatures can be achieved by using a low temperature grease and cold-weather battery packs
  2. Splitter Blocks cannot be used with oil, and are limited to 7 lubricant output settings.
  3. Maximum lube line length is dependent on ambient temperature, grease type and application back pressure.
Sorry, your query returned no results! The category you have chosen has no content at this time. Please try the "All Downloads" category.

Pages

Memolub
Application Case Study
Case Study No. 021819 - Lubricating Electric Motor Bearings
250hp Electric Motor Lubrication
Industry:
Energy Industry
Application:
Motors & Generators
Background:
Our customer needed a solution to automatically lubricate the 250 hp electric motors located on the roof top.
Issue:
Because these motors were in a very high location, the maintenance personnel had to climb several stories to manually lubricate the bearings.
Solution:
Drive shaft bearing: Installed a single-point MEMOLUB® Mega lubricators filled with Mobil Polyrex EM grease with a change-out setting of 3 months.
Support bearing: Installed a single-point MEMOLUB® HPS Standard filled Mobil Polyrex EM grease with a change-out setting of 3 months.
Results:
Streamlined their lubrication program and improved workplace safety.
Worth Mentioning:
Power Lube Industrial recommends the plastic Protective Cover for outdoor applications.

Download this case study.

Pages

Memolub
Application Case Study
Case Study No. 607
 Vertical Machining Center | Power Lube Industrial Vertical Machining Center | Power Lube Industrial
Application:
Machining Center
Industry:
Automotive
Issue:
Manual lubrication was done on an inconsistent basis, and often not at all on this vertical machining center.
Solution:
Two 6-Point MEMOLUB lubrication systems were placed inside the machine to service all lube points, while the lubricators were mounted outside the cabinet, for easy lube cartridge replacement and visual inspection.

Pages

Call to Order:
(800) 635-8170
Memolub
  PLCd Related Products
Product Description Item Number
L-Bracket Mount Kit IPMLLBK-1
  • L-Bracket Kit
  • Mount 2 Memolubs
IPMLLBK-2
Memolub Lubricant Refill Kits
See MEMOLUB Replacement Kits page
Memolub Standard and Mega Dust Cover
  • Memolub Standard and Mega Dust Cover
  • Fits Standard Model 120 and Mega Model 240
IPM-DCSM-1
Pre-filled Nylon Tubing
See Pre-filled Tubing Data Sheet