Downloads
The MEMOLUB® EM is a reusable, battery powered, electro-mechanical lubricator designed for single-point applications that require small amounts of lubricant over a long period of time. The MEMOLUB® EM uses the same proven mechanical design as existing MEMOLUB® models but in a lower output pressure version and with a highly simplified programming method.   .....Download
The MEMOLUB® ONE is a reusable, battery powered, electro-mechanical lubricator designed for single-point applications. The MEMOLUB® ONE uses the same proven mechanical design as existing MEMOLUB® models but in a lower output pressure version and with a highly simplified programming method.   .....Download
To open the lubricator, place it upright on a flat surface. With one hand on top of the transparent housing, press firmly. With the other hand, hold the ribbed surface of the locking ring and turn it counter-clockwise. Remove the locking ring and the transparent housing.   .....Download
PLC Powered and Controlled Lubrication The MEMOLUB® 24V-PLCd model lubricator is especially designed for PLC-controlled machinery (or mobile equipment) where a 24VDC power supply is available. It is ideal for lubricating a wide variety of robots, conveyors, and OEM applications. The MEMOLUB® 24V-PLCd can be direct-mounted for single-point applications, or remote-mounted using pipe or flexible tubing. In addition, lubrication from 2 to 12 lube points is possible with a MEMOLUB® Multi-Point Lubrication System. The MEMOLUB® 24V-PLCd lubricator has a unique design utilizing a Power-Through Memo which contains the electrical connections needed to power the unit. This gives the user the ability to quickly remove the lubricator for fast lubricant cartridge change-out while avoiding contact with the electrical connections. A 5-foot extension cable on the Power-Through Memo is connected to a PLC-controlled power supply. The PLC program controls the frequency of lubrication output cycles, which may be based upon elapsed clock hours, machine cycles, a count of parts produced, or other desired criteria. Further control is provided by adjusting the volume of lubricant ejected on each cycle.   .....Download
Battery Operated Lubrication with External Control The MEMOLUB® EPC offers the advantage of providing automatic lubrication to machines that are infrequently or intermittently used, avoiding the problems of over lubrication. The lubrication process can be turned on and off in concert with the machine being lubricated or manually using a simple switch. The MEMOLUB® EPC is battery powered and requires no external power source. It operates under its own MEMO program that you preset. This controls the frequency of lubrication cycles and volume of lubricant injected. The MEMOLUB® EPC can be mounted directly on the bearing or remote from the bearing using pipe or flexible tubing. It may be used as a Multi-Point System lubricating from 2 to 12 lube points and is available in any of the three MEMOLUB® sizes.   .....Download
Controlled lubrication with a 4.5VDC, 12VDC or 24VDC External Power Supply The MEMOLUB® EPS is ideally suited to applications in which machinery is intermittently or infrequently used. It provides the control needed to insure proper lubrication during periods of operation while avoiding the problem of over lubrication. An external 4.5VDC, 12VDC or 24VDC power source is connected to the 12 inch cable extending from the bottom of the MEMOLUB®. A battery pack is not required. Extension lead wires and connectors are available. The MEMOLUB® EPS can be mounted directly on the bearing point or remote from the bearing using pipe or flexible tubing. It may also be used as a Multi-Point System lubricating from 2 to 12 lube points. The EPS is available in any of the three MEMOLUB® sizes.   .....Download
The MEMOLUB® HPS (High Pressure System) is both an advanced design, highly accurate, single point automatic lubricator and a low cost miniature central lubricating system. It operates as a battery powered self-contained lubricator. Models are also available that use an external 4.5, 12 or 24DC volt power source. MEMOLUB® can operate under its own program control, under control of the machine being lubricated or a PLC.   .....Download

Pages