- Do not open the housing: loaded spring
- Hold MEMOLUB® down during manual checks
- Leq <70 dB
- Use MEMOLUB® only for greasing machinery
- Use only lubricant cartridges and batteries recommended by the manufacturer
Memolub® Multi-Point Lubrication System KNOWLEDGE BASE
Dimensions
Precautions
Specifications
| Operations; | Progressive valve cycled by positive displacement pump |
| Lubricant cartridge capacity: | 120cc, 240cc or 480cc (Replaceable) |
| Compatible lubricants: | Oil or Grease up to NLGI #2 |
| Connection thread: | A variety of lube point fittings and adapters are available |
| Max operating pressure: | 350psi (25 bar) |
| Lubricant output volume: | Standard output of 0.3cc, which increases to 0.6cc when coupled |
| Temperature range: | 5°F to 120°F (-15°C to 50°C) |
| Output settings: | Based on the MEMOLUB lubricator model used |
| Power supply: | 4.5VDC battery pack or 24VDC external power |
| External On/Off control: | YES, when used with the EPS or PLCD model lubricators |
| Remote installations: | Up to 30 feet (9 meters)* |
| Reusable: | The MEMOLUB lubricator is reusable |
| Multi-Point Systems available: | 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 & 12 outlet points** |
*Max lube line length is dependent on ambient temperature, grease viscosity & type and application back pressure
**Multi-Point Systems with more than 8 outlets have restrictions on tubing OD, tubing length and lubricant viscosity. Please call for sizing your MPS System.
Tubing length for MPS System
The maximum length of tubing for MPS systems is dependent on tubing I.D., ambient temperature, grease viscosity and consistency, and application back pressure.
Please call our staff at 800.635.8170 to answer any questions about sizing and installing your MPS System.
| Viscosity | 2 to 8 Outlets | 9 to 12 Outlets |
|---|---|---|
| 1000 cSt | 20 ft (6m) | 10 ft (3m) |
| 3000 cSt | 16 ft (5m) | Call |
| 5000 cSt | 13 ft (4m) | |
| 9000 cSt | 7 ft (2m) | |
| 15000 cSt | 3 ft (1m) |