Part Numbers:
MLEPC120 - MEMOLUB EPC Model 120cc
MLEPC240 - MEMOLUB EPC Model 240cc
MLEPC480 - MEMOLUB EPC Model 480cc
Lubricant cartridges & battery packs sold separately
How to order your MEMOLUBĀ® EPC lubricator - click here .pdf
The MEMOLUBĀ® EPC lubricator automatically delivers a small, precise amount of lubricant at regular intervals for an continuous supply of fresh lubricant directly to your lube point. Prevents over and under lubrication problems related to manual lubrication.
All MEMOLUBĀ® EPC models use the same motor base assembly, making it easy to convert from one lubricant capacity to another by simply purchasing a low cost transparent housing kit.
The on/off function of the MEMOLUBĀ® EPC is controlled by an external switch. The 12 inch cable that extends from the bottom of the lubricator serves to interrupt the electric circuit to the drive motor. When a switch or relay closes the circuit, the MEMOLUBĀ® EPC first goes through an output cycle and then proceeds to operate under its own preset program control. When the circuit is opened the lubrication process stops
Simple MEMO Programming
The MEMOLUBĀ® EPC lubricant output is programmed using the simple MEMO system. It consists of a brass MEMO fitting, a black plastic timing-ring holder, and three plastic timing rings (one white, one red, and one black). The MEMO can be programmed to control both the frequency of lube cycles and the volume of lubricant discharged. Once the MEMO is programmed and installed any MEMOLUBĀ® EPC lubricator will recognize the settings. The program settings can be changed at any time, should your application require more or less lubricant.
Basic Frequency Settings
There are 7 basic frequency settings that are suitable for most industrial applications. They are programmed by installing one or a combination of the three colored timing rings into the ring holder attached to the brass fitting. When you screw the MEMOLUBĀ® lubricator onto the brass fitting, the timing rings depress the switches on the bottom of the lubricator. This activates the lubricator program.
Adjusting the Volume of Lubricant
Included in the MEMO kit is eight spacer washers for adjusting the amount of lubricant discharged per lube cycle. Installing one, or a combination of all eight washers, into the brass MEMO fitting will limit the stroke length of the piston inside the lubricator.Product Resources:
Contact us to learn more about the easy-to-use, effective MEMOLUB lubricator.
Product Description | Item Number | |
---|---|---|
|
IPMLLBK-2 | |
|
See MEMOLUB Replacement Kits page | |
|
IPM-DCSM-1 | |
|
See Pre-filled Tubing Data Sheet | |
|