- Single-Point Lubricators
- Multi-Point Lubricators
- Industrial Fittings
The MEMOLUBÂ® MPS-10 (Multi-Point System) is a precise, reliable, and easy to install system that can lubricate 10 lube points with one lubricator.
All of the materials required are available to quickly put your MEMOLUBÂ® HPS lubricator to profitable use in a multi-point application.
Purchase prefilled nylon tubing and make installation as simple as "Plug 'n Lube"
The MPS-10 System consists of a MEMOLUBÂ® high pressure lubricator, a distribution valve which meters the lubricant to all lube points, a mounting bracket and push-in tube fittings for your bearings.
All MEMOLUBÂ® MPS systems have been primed before shipment and are ready for use. On first installation of the MPS system, all lube lines and bearings should be pre-charged with the same lubricant that was ordered with the MEMOLUBÂ® lubricator (prefilled tubing is available and sold separately).
This system is especially suited for applications with several lube points in close proximity.
Grease or Oil:
There are two system types available; one for grease applications and one for oil applications. When ordering, be certain to specify the system appropriate for your application.
Protective Cover: To protect your MEMOLUBÂ® lubricator in harsher evironments we offer a nylon protective cover. This cover is sold seperately and is available for all three size lubricators.
Prefilled Nylon Tubing: Nylon tubing required to complete the installation is sold separately. The standard size tubing is 5/16â€ť OD, but other sizes are available. Tubing can be purchased two ways; pre-filled in 5 foot increments from 5 to 30 feet, or empty in any length from 1 to 100 feet.
Case Study No. 030119 - Lubricating Conveyor Bearings
Steel, Aluminum, Glass & Plastic
This steel mill operating 24/7 was manually lubricating the conveyor bearings.
The daily manual lubrication procedure on the conveyor bearings were time consuming and often forgotten due to the inaccessibility and harsh environment.
The 350psi output pressure of the MEMOLUBÂ® HPS 480 allowed the lubricators to be mounted in a safe location outside the guarding with lube lines running to the bearings.
The MEMOLUBÂ® provided continuous supply of lubricant to each bearing which reduced production downtime, bearing failures man hours.
They used braided rubber hose to prevent damage to the lube lines in the harsh environment.
|Product Description||Item Number|
||See MEMOLUB Replacement Kits page|
|See Pre-filled Tubing Data Sheet|